السلام عليكم،
هادول الفقرتين بتتكلمان عن دور كل من دارة الإرسال و الإستقبال،و كلل الفقرتين مكتوبتين باللغتين الفرنسية و الإنجليزية،
Rôles du circuit d’émission**1 :
*Prélèvement de la température grâce au capteur DS18B20 .
* Durée entre 2 mesure pré-configurable : 1/15 min;1/5 heure.
*Possibilité de pris de mesure instantanée par action sur un bouton poussoir.
*Sauvegarde de secours de la donnée dans la mémoire interne du PIC.
*émission de la donnée par voie hertzienne par le biais d’un module d’émission,
Le Telecontrolli RT8.
*Gestion de la communication avec le DS18B20 et le RT8 par le microcontrôleur PIC 16F870.
*Commutation en mode SLEEP du microcontrôleur de manière à limiter la consommation de courant.
Roles of the circuit of emission**1:
* Taking away of the temperature through sensor DS18B20.
* Duration between 2 configurable pre measurement: 1/15 min;1/5 hours.
* Possibility of taken of instantaneous measurement by action on a pushbutton.
* backup help of the data in the internal memory of the (PEAK) PIC.
* emission of the data by hertzian way by the means of a module of emission,
Telecontrolli RT8.
* Management of the communication with the DS18B20 and the RT8 by the microcontrolor PEAK 16F870.
* Commutation in mode SLEEP of the microcontrolor so as to limit the current consumption.
2 **Rôles du circuit de réception :
*Réception de la donnée provenant de la carte d’émission par le biais d’un module de réception, le Telecontrolli RRQ1.
*Sauvegarde des données dans la mémoire interne du PIC.
*Affichage des données reçues sur un écran LCD :
-la température courante
-le nombre de mesures reçues
-le délai entre chaque mesure
*Transmission des données sauvegardées du PIC vers le PC lorsque la demande en est faite par l’utilisateur.
*Le microcontrôleur PIC16F876 assurera la gestion de la communication avec le RRQ1,
L’afficheur et le PC.
Roles of the circuit of reception**2:
* Reception of the data coming from the chart of emission by the means of a module of reception, Telecontrolli RRQ1.
* backup data in the internal memory of the PIC.
* Posting of the data received on a screen LCD:
it current temperature
numbers it received measurements
it time between each measurement
* Transmission of the data safeguarded of the P towards the PC(computer) when the request is made by it by the user.
* Microcontrolor PIC16F876 will ensure the management of the communication with the RRQ1,
The bill-poster and the PC.
إلى فقرات أخرى إن شاء الله
**تحياتي
_______________
الأخت/ فريدة
مواقع النشر (المفضلة)