شركة انجاز لتصميم وتطوير المواقع الإلكترونية

صفحة 1 من 5 123 ... الأخيرةالأخيرة
النتائج 1 إلى 7 من 33

الموضوع: قاموس للمصطلحات الالكترونية.

  1. #1
    مشرفة سابقة
    Array الصورة الرمزية نغم86
    تاريخ التسجيل
    Jul 2006
    الدولة
    فلسطين الحبيبة
    العمر
    37
    المشاركات
    288
    شكراً
    0
    شكر 0 مرات في 0 مشاركات
    معدل تقييم المستوى
    223

    قاموس للمصطلحات الالكترونية.

    [align=left][align=center]بسم الله الرحمن الرحيم
    المصطلحات الالكترونية
    مرتبة أبجديا[/align]A

    A
    Abbreviation for "ampere" a unit of electrical current

    absorption
    Loss or dissipation of energy as it travels through a medium, Example: radio waves lose some of their energy as they travel through the atmosphere.

    AC
    Abbreviation for "Alternating Current"

    acceptor atoms
    Trivalent atoms that accept free electrons from pentavalent atoms

    AC coupling
    Circuit that passes an AC signal while blocking a DC voltage.

    AC/DC
    Equipment that will operate on either an AC or DC power source.

    AC generator
    Device used to transform mechanical energy into AC electrical power.


    AC load line
    A graph representing all possible combinations of AC output voltage
    and current for an amplifier.

    AC power supply
    Power supply that delivers an AC voltage.

    active component
    A component that changes the amplitude of a signal between input and output.

    active filter
    A filter that uses an amplifier in addition to reactive components to pass or reject selected frequencies.

    active region
    The region of BJT operation between saturation and cutoff used for linear amplification.

    AC voltage
    A voltage in which the polarity alternates.

    ADC
    Abbreviation for "analog to digital converter"

    Admittance
    (symbol "Y") Measure of how easily AC will flow through a circuit. Admittance is the reciprocal of impedance and is measured in siemens.

    AF
    Abbreviation for "audio frequency".

    AFC
    Abbreviation for "automatic frequency control".

    AGC
    Abbreviation for "automatic gain control"


    alligator clip
    Spring clip on the end of a test lead used to make a temporary connection.

    alpha
    Ratio of collector current to emitter current in a bipolar junction transistor (BJT). Greek letter alpha "a" is the symbol used.


    alternator
    Name for an AC generator.

    AM Abbreviation for "amplitude modulation"

    ammeter
    A meter used to measure current.

    ampere
    Unit of electrical current.

    amplifier

    A circuit that increases the voltage, current, or power of a signal.

    amplitude:
    Magnitude or size of a signal voltage or current.

    analog
    Information represented as continously varying voltage or current rather than in discrete levels as opposed to digital data varying between two discrete levels.

    anode The positive electrode or terminal of a device. The "P" material of a diode.

    antenna, transmitting
    A device that converts an electrical wave into an electromagnetic wave that radiates away from the antenna.

    antenna, receiving
    A device that converts a radiated electromagnetic wave into an electrical wave.

    apparent power
    Power attained in an AC circuit as a product of effective voltage and current which reach their peak at different times.

    arc
    Discharge of electricity through a gas such as lightning discharging through the atmosphere.

    armature:
    The rotating or moving component of a magnetic circuit.


    astable multivibrator
    An oscillator that produces a square wave output from a DC voltage.

    atom
    The smallest particle that an element can be broken down into and still maintain its unique identity.

    atomic number
    The number of positive charges or protons in the nucleus of an atom.

    attenuate
    To reduce the amplitude of an action or signal. The opposite of amplification.

    autotransformer
    A single winding transformer where the output is taken from taps on the winding.

    average value
    A value of voltage or current where the area of the wave above the value equals the area of the wave below the value.

    AVC
    Abbreviation for "automatic volume control"

    avionics
    Aviation electronics.

    AWG
    Abbreviation for "american wire gauge". A gauge that assigns a number value to the diameter of a wire.
    =================================== =============== =======================
    B

    balanced bridge

    Condition that occurs when a bridge circuit is adjusted to produce a zero output.

    band-pass filter
    A tuned circuit designed to pass a band of frequencies between a lower cut-off frequency (f1) and a higher cut-off frequency (f2). Frequencies above and below the pass band are heavily attenuated.

    band-stop filter
    A tuned circuit designed to stop frequencies between a lower cut-off frequency (f1) and a higher cut-off frequency (f2) of the amplifier while passing all other frequencies.

    bandwidth
    Width of the band of frequencies between the half power points.

    barrier potential
    The natural difference of potential that exists across a forward biased pn junction.

    base
    The region that lies betwen the emitter and collector of a bipolar junction transistor (BJT).

    base biasing
    A method of biasing a BJT in which the bias voltage is supplied to the base by means of a resistor.

    battery
    A DC voltage source containing two or more cells that convert chemical energy to electrical energy.

    baud
    A unit of signaling speed equal to the number of signal events per second. Not necessarily the same as bits per second.

    beta
    (b) The ratio of collector current to base current in a bipolar junction transistor (BJT).

    bias
    A DC voltage applied to a device to control its operation.

    binary
    A number system having only two symbols, 0 and 1. A base 2 number system.

    bipolar junction transistor
    (BJT), A three terminal device in which emitter to collector current is controlled by base current.

    bistable multivibrator
    A multivibrator with two stable states. An external signal is required to change the output from one state to the other. Also called a latch.

    bleeder current
    A current drawn continously from a souce. Bleeder current is used to stabilize the output voltage of a source.

    bode plot

    A graph of gain versus frequency.

    branch current
    The portion of total current flowing in one path of a parallel circuit.

    breakdown voltage
    Voltage at which the breakdown of a dialectric or insulator occurs.

    breakover voltage
    Minimum voltage required to cause a diac to break down and conduct.

    bridge rectifier
    A circuit using four diodes to provide full wave rectification. Converts an AC voltage to a pulsating DC voltage.


    buffer
    An amplifier used to isolate a load from a source.

    bulk resistance
    The natural resistance of a "P" type or "N" type semiconductor material.

    butterworth filter
    A type of active filter characterized by a constant gain (flat response) across the midband of the circuit and a 20 dB per decade roll-off rate for each pole contained in the circuit.

    BW
    Abbreviation for bandwidth.

    bypass capacitor
    A capacitor used to provide an AC ground at some point in a circuit.

    byte
    Group of eight binary digits or bits.
    =================================== =============== =====================
    [/align]
    التعديل الأخير تم بواسطة نغم86 ; 08-31-2006 الساعة 10:20 PM
    ربي خلقتني واحسنت تكويني ......وزدتني شرفا بأن جعلتني فلسطيني


  2. #2
    مشرفة سابقة
    Array الصورة الرمزية نغم86
    تاريخ التسجيل
    Jul 2006
    الدولة
    فلسطين الحبيبة
    العمر
    37
    المشاركات
    288
    شكراً
    0
    شكر 0 مرات في 0 مشاركات
    معدل تقييم المستوى
    223

    [align=left]C

    cable
    Group of two or more insulated wires.

    CAD
    Abbreviation for "computer aided design"

    calibration
    To adjust the correct value of a reading by comparison to a standard.

    capacitance
    The ability of a capacitor to store an electrical charge. The basic unit of capacitance is the Farad.

    capacitive reactance
    The opposition to current flow provided by a capacitor. Capacitive reactance is measured in ohms and varies inversly with frequency.

    capacitor
    An electronic component having capacitive reactance.

    capacitor microphone
    Microphone whose operation depends on variations in capacitance caused by varying air pressure on the movable plate of a capacitor.

    carbon-film resistor
    Device made by depositing a thin carbon film on a ceramic form.

    carbon microphone
    Microphone whose operation depends on pressure variation in carbon granules causing a change in resistance.

    carbon resistor
    Resistor of fixed value made by mixing carbon granules with a binder which is moulded and then baked.

    cascaded amplifier
    An amplifier with two or more stages arranged in a series configuration.

    cascode amplifier
    A high frequency amplifier made up of a common-source amplifier with a common-gate amplifier in its drain network.

    cathode
    The negative terminal electrode of a device. The "N" material in a junction diode.

    cathode ray tube
    (CRT) Vacuum tube used to display data in a visual form. Picture tube of a television or computer terminal.

    cell
    Single unit used to convert chemical energy into a DC electrical voltage.

    center frequency
    Frequency to which an amplifier is tuned. The frequency half way between the cut-off frequencies of a tuned circuit.

    center tap
    Midway connection between the two ends of a winding.

    center tapped rectifier
    Circuit that make use of a center tapped transformer and two diodes to provide full wave rectification.

    center tapped transformer
    A transformer with a connection at the electrical center of a winding.

    ceramic capacitor
    Capacitor in which the dialectric is ceramic.

    charge
    Quantity of electrical energy.

    charge current
    Current that flows to charge a capacitor or battery when voltage is applied.

    chassis
    ****l box or frame into which components are mounted.

    chassis ground
    Connection to a chassis.

    chebyshev filter
    A type of active filter characterized by high roll-off rates (40 dB per decade per pole) and midband gain that is not constant.

    choke
    Inductor used to oppose the flow of alternating current.

    circuit
    Interconnection of components to provide an electrical path between two or more components.

    circuit breaker A protective device used to open a circuit when current exceeds a maximum value. In effect a reusable fuse.

    clamper
    A diode circuit used to change the DC level of a waveform without distorting the waveform.

    clapp oscillator
    A variation of the Colpitts oscillator. An added capacitor is used to eliminate the effects of stray capacitance on the operation of the basic Colpitts oscillator.

    class A amplifier
    A linear amplifier biased so the active device conducts through 360 degrees of the input waveform.

    class B amplifier
    An amplifier with two active devices. The active components are biased so that each conducts for approximately 180 degrees of the input waveform cycle.

    class C amplifier
    An amplifier in which the active device conducts for less than 180 degrees of the input waveform cycle.

    clipper
    A diode circuit used to eliminate part of a waveform

    clipping
    Distortion caused by overdriving an amplifier.

    clock
    A square waveform used for synchronizing and timing of several circuits.

    closed circuit
    Circuit having a complete path for current flow.


    coaxial cable
    Transmission line in which the signal carrying conductor is covered by a dialectric and another conductor.

    coefficient of coupling
    The degree of coupling between two circuits.

    ]coercive force
    (H) Magnetizing force needed to reduce residual magnetism in a material to zero.

    [collector
    The semiconductor region in a bipolar junction transistor through which a flow of charge carriers leaves the base region.

    collector characteristic curve
    A graph of collector voltage over collector current for a given base current.

    color code
    Set of colors used to indicate value of a component.


    common-anode display
    A multisegment light emitting diode (LED) with a single positive voltage input connection. Separate cathode connections are provided for each individual segment.

    common cathode display
    A multisegment light emitting diode (LED) with a single negative voltage input connection. Separate anode connections are provided for each individual segment.

    common base amplifier
    A BJT circuit in which the base connection is common to both input and output.

    common collector amplifier
    A BJT circuit in which the collector connection is common to both input and output.

    common drain amplifier
    A FET circuit in which the drain connection is common to both input and output.

    common emitter amplifier
    A BJT circuit in which the emitter connection is common to both input and output.

    common gate amplifier
    A FET circuit in which the gate connection is common to both input and output.

    common source amplifier
    A FET circuit in which the source connection is common to both input and output.

    common-mode rejection ratio
    (CMRR) The ratio of op-amp differential gain to common-mode gain. A measure of an op-amp’s ability to reject common-mode signals such as noise.

    common-mode signals
    Signals that appear simultaneously at two inputs of an operational amplifier (op-amp). Common mode signals are always equal in amplitude and phase.

    comparitor
    An op-amp circuit that compares two inputs and provides a DC output indicating the polarity relationship between the inputs.

    complementary symmetry amplifier
    A class B amplifier using matched complementry transistors. Does not require a phase inverter for push-pull output.

    complementry transistors
    Two transistors, one NPN and one PNP having near identical charastics. N-channel and P-channel FETs can also be complementry.

    complex numbers
    Numbers composed of a real number part and an imaginary number part.

    compliance
    The maximum possible peak-to-peak output of an amplifier.

    constant current circuit
    Circuit used to maintain constant current to a load having resistance that changes.

    contact
    Current carrying part of a switch, relay or connector.

    continuity
    Occurs when a complete path for current exists.

    conventional current flow
    Concept of current produced by the movement of positive charges towards the negative terminal of a source.

    copper loss
    Power lost in transformers, generators, connecting wires and other parts of a circuit due to current flow through the resistance of copper conductors.

    core
    Magnetic material within a coil used to concentrate the magnetic field.

    coulomb
    Unit of electric charge. A negative coulomb charge consists of 6.24 × 1018 electrons.

    counter electromotive force
    (counter emf) Voltage induced into an inductor due to an alternating or pulsating current. Counter emf is always in polarity opposite to that of the applied voltage. Opposing a change of current.

    coupling
    To electronically connect two circuits so that signal will pass from one to the other.

    Feed configuration where a portion of the output current is fed to the amplifier input.

    =================================== ==============
    [/align]
    التعديل الأخير تم بواسطة نغم86 ; 08-31-2006 الساعة 10:23 PM
    ربي خلقتني واحسنت تكويني ......وزدتني شرفا بأن جعلتني فلسطيني


  3. #3
    مشرفة سابقة
    Array الصورة الرمزية نغم86
    تاريخ التسجيل
    Jul 2006
    الدولة
    فلسطين الحبيبة
    العمر
    37
    المشاركات
    288
    شكراً
    0
    شكر 0 مرات في 0 مشاركات
    معدل تقييم المستوى
    223

    [align=left]
    ]current mirror
    Term used to describe the fact that DC current through the base circuit of a class B amplifier is approximately equal to the DC collector current.

    cutoff
    Condition when an active device is biased such that output current is near zero or beyond zero.

    cutoff frequency
    Frequency at which the power gain of an amplifier falls below 50% of maximum.
    =================================== ===============

    D


    DAC
    Abbreviation for "digital to analog converter."

    damping
    Reduction in magnitude of oscillation due to energy being dissipated as heat.

    darlington pair
    An amplifier consisting of two bipolar junction transistors with their collectors connected together and the emitter of one connected to the base of the other. Circuit has an extremely high current gain and input impedance.
    DC
    Abbreviation for "direct current".

    DC load line
    A graph representing all possible combinations of voltage and current for a given load resistor in an amplifier.

    DC offset
    The change in input voltage required to produce a zero output voltage when no signal is applied to an amplifier.

    DC power supply
    Any source of DC power for electrical equipment.

    dead short
    Short circuit having zero resistance.

    decade
    A frequency factor of ten.

    decibel
    (dB) a logarithmic representation of gain or loss.


    delay time
    The time for collector current to reach 10% of its maximum value in a BJT switching circuit.

    depletion region
    Thre area surrounding a pn junction that is depleted of carriers.

    depletion mode
    In a FET, an operating mode where reverse gate-source voltage is used to deplete the channel of free carriers. This reduces the size of the channel and increases its resistance.

    depletion-mode MOSFET
    A MOSFET designed to operate in either depletion mode or enhancement mode.

    device
    A component or part.

    diac
    A two terminal bidirectional thyristor. Has a symmetrical switching mode.

    dielectric
    Insulating material between two plates where an electrostatic field exists.

    dialectric constant
    Property of a material that determines how much electrostatic energy can be stored per unit volume when unit voltage is applied.

    dialectric strength
    The maximum voltage an insulating material can withstand without breaking down.

    differential amplifier
    An amplifier in which the output is in proportion to the differences between voltages applied to its two inputs.

    differentiator
    A circuit in which the output voltage is in proportion to the rate of change of the input voltage. A high pass RC circuit.

    diffusion
    Tendency of conduction band electrons to wander across a pn junction to combine with valence band holes.

    digital
    Relating to devices or circuits that have outputs of only two discrete levels. Examples: 0 or 1, high or low, on or off, true or false etc.

    diode
    A two terminal device that conducts in only one direction.

    direct current
    Current that flows in only one direction.

    discharge
    Release of energy stored in either a battery or a capacitor.

    discrete component
    Package containing only a single component as opposed to an integrated circuit containing many components in a single package.

    dissipation
    Release of electrical energy in the form of heat.

    distortion
    An undesired change in a waveform or signal.

    distributed capacitance
    Any capacitance other than that within a capacitor. For example, the capacitance between adjacent turns of wire in a coil.

    distributed inductance
    Any inductance other than that within an inductor. Example inductance in any conductor.


    donor atoms
    Pentavalent atoms that give up electrons to the conduction band in an N type semiconductor material.

    doping
    The process of adding impurity atoms to intrinsic (pure) silicon or germanium to improve the conductivity of the semiconductor material.

    dot convention
    Standard used with transformer symbols to indicate whether the secondary voltage is in phase or out of phase with the primary voltage.

    drift
    A problem that can develop in tuned amplifiers when the frequency of the tuned circuit changes due to temperature or component aging.

    dropping resistor
    Resistor whose value has been chosen to drop or develop a given voltage.

    dry cell
    DC voltage generating chemical cell using a non liquid (paste) electrolyte.

    dual in-line package
    Integrated circuit package having two rows of connecting pins.

    dual trace oscilloscope
    Oscilloscope that can simultaneously display two signals.

    dynamic
    Relating to conditions that are changing or in motion
    =================================== =============== ===================
    E


    E-core
    Laminated form in the shape of the letter "E", onto which inductors and transformers are wound.

    efficiency
    The amount of power delivered to the load of an amplifier as a percentage of the power required from the power supply.

    electricity
    Science states that certain particles possess a force field or charge. The charge possessed by an electron is negative while the charge possessed by a proton is positive. Electricity can be divided into two groups, static and dynamic. Static electricity deals with charges at rest and dynamic electricity deals with charges in motion.

    electric polarization
    A displacement of bound charges in a dielectric when placed in an electric field.

    electro acoustic transducer
    Device that produces an energy transfer from electric to acoustic (sound) or from acoustic to electric. Examples include a microphone, earphones and loudspeakers.

    electroluminescence
    Conversion of electrical energy into light energy.

    electrolyte
    Electrically conducting liquid (wet) or paste (dry)

    electrolytic capacitor
    A capacitor having an electrolyte between the two plates. A thin layer of oxide is deposited on only the positive plate. The oxide acts as the dielectric for the capacitor. Electrolytic capacitors are polarized and so must be connected in correct polarity to prevent breakdown.

    electromagnet
    A coil of wire usually wound on a soft iron or steel core. When current is passed through the coil a magnetic field is generated. The core provides an easy path for the magnetic lines of force. This concentrates the field in the core.

    electromagnetic communication
    Use of an electromagnetic wave to pass information between two points. Also called wireless communication.

    electromagnetic induction
    Voltage produced in a coil due to relative motion between the coil and magnetic lines of force.

    electromagnetic spectrum
    List or diagram showing the range of electromagnetic radiation.

    electromagnetic wave
    Wave that consists of both electric and magnetic variation.

    electromagnetism
    Relates to the magnetic field generated around a conductor when current is passed through it.

    electromotive force
    (emf) Force that causes the motion of electrons due to potential difference between two points. (voltage)

    electron
    Smallest sub atomic particle of negative charge that orbits the nucleus of an atom.

    electron flow
    Electrical current produced by the movement of free electrons towards a positive terminal.

    electrostatic
    Related to static electric charge.

    electrostatic field
    Force field produced by static electrical charges.

    emitter
    The semiconductor region from which charge carriers are injected into the base of a bipolar junction transistor.

    emitter follower
    A common collector amplifier. Has a high current gain, high input impedance and low output impedance.

    energy
    Capacity to do work.

    enhancement-mode MOSFET
    A field effect transistor in which there are no charge carriers in the channel when the gate source voltage is zero.

    equivalent resistance
    Total resistance of all the individual resistances in a circuit=================================== =============== =================
    [/align][/color]
    التعديل الأخير تم بواسطة نغم86 ; 08-31-2006 الساعة 10:39 PM
    ربي خلقتني واحسنت تكويني ......وزدتني شرفا بأن جعلتني فلسطيني


  4. #4
    مشرفة سابقة
    Array الصورة الرمزية نغم86
    تاريخ التسجيل
    Jul 2006
    الدولة
    فلسطين الحبيبة
    العمر
    37
    المشاركات
    288
    شكراً
    0
    شكر 0 مرات في 0 مشاركات
    معدل تقييم المستوى
    223

    [align=left]F

    fall time
    Time it takes the falling edge of a pulse to go from 90% of peak voltage to 10% of peak voltage.

    ferrite
    A powdered, compressed and sintered magnetic material having high resistively. The high resistance makes eddy current losses low at high frequencies.

    ferrite bead
    Ferrite composition in the form of a bead. Running a wire through the bead increases the inductance of the wire.
    ferrite-core inductor
    An inductor wound on a ferrite core.

    ferrites
    Compound composed of iron oxide, a ****llic oxide and ceramic. The ****l oxides include zinc, nickel, cobalt or iron.

    ferrous
    Composed of and or containing iron. A ferrous ****l exhibits magnetic characteristics as opposed to non-ferrous material.

    fiber optics
    Laser’s light output carries information that is conveyed between two points by thin glass optical fibers.

    field effect transistor
    (FET) A voltage controlled transistor in which the source to drain conduction is controlled by gate to source voltage.

    filament
    Thin thread of carbon or tungsten which produces heat or light with the passage of current.

    filter
    Network consisting of capacitors, resistors and/or inductors used to pass certain frequencies and block others.

    flip flop
    A bistable multivibrator. A circuit which has two output states and is switched from one to the other by means of an external signal (trigger).

    floating ground
    Common connection in a circuit that provides a return path for current but is not connected to an earth ground.

    flow soldering
    Flow or wave soldering technique in large scale electronic assembly to solder all the connections on a printed circuit board by moving the board over a wave of molten solder.

    flux
    Material used to remove oxide films from the surface of ****ls in preparation for soldering.

    flux
    In magnetism, the magnetic field consisting of lines of force.

    flux density
    The concentration of magnetic lines of force. Determines strength of the magnetic field.

    flywheel effect
    Sustaining effect of oscillation in an LC circuit.

    forward bias
    A PN junction bias which allows current to flow through the junction. Forward bias decreases the resistance of the depletion layer.

    free electrons
    Electrons that are not in any orbit around a nucleus.

    free running multivibrator
    A multivibrator that produces a continuous output waveform without any signal input. A square wave generator used to produce a clock signal.

    frequency
    Rate of recurrence of a periodic wave. Measured in Hertz (cycles per second).

    frequency-division multiplex
    (FDM) Transmission of two or more signals over a common path by using a different frequency band for each signal.

    frequency-domain analysis
    A method of representing a waveform by plotting its amplitude against frequency.

    frequency meter
    Meter used to measure frequency of periodic waves.

    frequency multiplier
    A harmonic conversion circuit in which the frequency of the output signal is an exact multiple of the input frequency.

    frequency response
    Indication of how well a circuit responds to different frequencies applied to it.

    frequency response curve
    A graph of amplitude over frequency indicating a circuit response to different frequencies.

    full scale deflection
    (FDS) Deflection of a meter’s pointer to the farthest position on the scale.

    full wave rectifier
    Rectifier that makes use of the full AC wave in both the positive and negative half cycles.

    function generator
    Signal generator that can produce sine, square, triangle and sawtooth output waveforms.

    fundamental frequency
    Lowest frequency in a complex waveform.

    fuse
    A protective device in the current path that melts or breaks when current exceeds a predetermined maximum value
    =================================== =============== ===================
    G

    gain
    Increase in voltage, current and/or power. Gain is expressed as a ratio of amplifier output value to the corresponding amplifier input value.

    gain bandwidth product
    A device parameter that indicates the maximum possible product of gain and bandwidth. The gain bandwidth product of a device is equal to the unity gain frequency (funity) of the device.

    gamma rays
    High frequency electromagnetic radiation from radio active particles.

    ganged
    Mechanical coupling of two or more capacitors, switches, potentiometers, or any other adjustable components so that adjusting one control will operate all.

    gas

    Any aeriform or completely elastic fluid which is not a solid or a liquid. Gasses are produced by heating a liquid beyond its boiling point.

    geiger counter
    Device used to detect nuclear particles.

    generator
    Device used to convert mechanical energy to electrical energy.

    giga
    Metric prefix for 1 billion (109).

    ground
    An intentional or accidental conducting path between an electrical system or circuit and the earth or some conducting body acting in place of the earth. A ground is often used as the common wiring point or reference in a circuit.

    gunn diode
    A semiconductor diode that utilizes the Gunn effect to produce microwave frequency oscillation or to amplify a microwave frequency signal.
    =================================== =============== =======================
    H

    half power point
    A frequency at which the power is 50% of maximum. This corresponds to 70.7% of maximum current or voltage.

    h-parameters
    (hybrid parameters) Transistor specifications that describe the component operating limits under specific circumstances.

    half wave rectifier
    A diode rectifier that converts AC to pulsating DC by eliminating either the negative or the positive alternation of each input AC cycle.

    harmonic
    Sine wave that is smaller in amplitude and some multiple of a fundamental frequency. Example: 880 Hz. is the second harmonic of 440 Hz., 880 Hz. is the third harmonic of 220 Hz.

    henry
    The basic unit of inductance.

    HERTZ
    (Hz.) Unit of frequency. One hertz is equal to one cycle per second.

    high fidelity
    (Hi Fi)Sound reproduction equipment that reproduces sound as near to the original sound as possible

    high-pass filter
    A tuned circuit designed to pass all frequencies above a desnigated cut-off frequency. Frequencies below the cut-off frequency are rejected or attenuated

    high tension
    Lethal voltage in the kilovolt range and above.

    hole
    A gap left in the covalent bond when a valence electron gains sufficient energy to jump to the conduction band

    hologram
    Three-dimensional picture created with a laser.

    holography
    The science dealing with three-dimensional optical recording.

    horizontally polarized wave
    Electromagnetic wave that has the electric field in the horizontal plane.

    hybrid circuit
    Circuit that combines two technologies (passive and active or discrete and integrated components) onto one microelectronic circuit. Passive components are usual made by thin film techniques, while active components are made with semiconductor techniques.

    hysteresis
    Amount that the magnetization of a material lags the magnetizing force due to molecular friction. In Schmitt Trigger circuits, the difference between the upper and lower trigger points.
    =================================== =============== ========================
    [/align]
    التعديل الأخير تم بواسطة نغم86 ; 08-31-2006 الساعة 10:47 PM
    ربي خلقتني واحسنت تكويني ......وزدتني شرفا بأن جعلتني فلسطيني


  5. #5
    مشرفة سابقة
    Array الصورة الرمزية نغم86
    تاريخ التسجيل
    Jul 2006
    الدولة
    فلسطين الحبيبة
    العمر
    37
    المشاركات
    288
    شكراً
    0
    شكر 0 مرات في 0 مشاركات
    معدل تقييم المستوى
    223

    [align=left]I

    IC
    Abbreviation for "integrated circuit"

    IC voltage regulator
    Three terminal device used to hold the output voltage of a power supply constant over a wide range of load variations.

    IGFET
    Insulated gate field effect transistor. Another name for a "MOSFET."

    impedance
    (Z) Measured in ohms it is the total opposition to the flow of current offered by a circuit. Impedance consists of the vector sum of resistance and reactance.

    impedance coupling
    Coupling of two signal amplifier circuits through the use of an impedance such as a inductor.

    impedance matching
    Matching the output impedance of a source to the input impedance of a load to attain maximum power transfer.

    incandescence
    State of a material when heated to the point where it emits light. (red hot or white hot).

    induced voltage
    Voltage generated in a conductor when subjected to a moving magnetic field.

    inductance
    Property of a circuit to oppose a change in current. The moving magnetic field produced by a change in current causes an induced voltage to oppose the original change.

    inductive circuit
    Circuit having greater inductive reactance than capacitive reactance.

    inductive reactance
    Opposition to the flow of AC current produced by an inductor. Measured in Ohms and varies in direct proportion to frequency.

    inductor
    Length of conductor used to introduce inductance into a circuit. The conductor is usually wound into a coil to concentrate the magnetic lines of force and maximize the inductance. While any conductor has inductance, in common usage the term inductor usually refers to a coil.

    infrared
    Electromagnetic heat radiation whose frequencies are above the microwave frequency band and below red in the visible band.

    inhibit
    To stop an action or block data from passing.

    in phase
    When two or more waves of the same frequency have their positive and negative peaks occurring at the same time.

    input impedance
    Opposition to the flow of signal current at the input of a circuit or load.

    insulated
    When a non conducting material is used to isolate conducting materials from one another.

    insulating material
    Material that will prevent the flow of current due to its chemical composition.

    insulation resistance
    Resistance of insulating material. The greater the insulation resistance, the better the insulation.

    integrated
    When two or more components are combined into a circuit and then incorporated into a single package.

    integrator
    A device that approximates and whose output is proportional to an integral of the input signal. A low pass filter.

    intermediate frequency amplifier
    In a superheterodyne radio it amplifies a fixed frequency lower than the received radio frequency and higher than the audio frequency.

    intermittent
    A fault occurring at random intervals of time. Intermittent problems are often difficult to locate because of the random nature. They often don’t occur when the technician is present.

    internal resistance
    Every source has some resistance in series with the output current. When current is drawn from the source some power is lost due to the voltage drop across the internal resistance. Usually called output impedance or output resistance.

    intrinsic material
    A semiconductor material with electrical properties essentially characteristic of ideal pure crystal. Essentially silicon or germanium crystal with no measurable impurities.

    intrinsic stand-off ratio
    A unijunction transistor (UJT) rating used to determine the firing potential of the device.

    inverting amplifier
    An amplifier that has a 180° phase shift from input to output.

    inverting input
    In an operational amplifier (op amp) the input that is marked with a minus sign. A signal applied at the inverting input will be given 180° phase shift between input and output.

    ion
    An atom with fewer electrons in orbit than the number of protons in the nucleus is a positive ion. An atom with a greater number of electrons in orbit than the number of protons in the nucleus is a negative ion.

    ionized
    Atoms become ionized when they gain or lose a valence electron.
    =================================== =============== =====================
    J

    j
    A prefix used to indicate an imaginary number. (Operator j)

    jack
    Socket or connector into which a plug may be inserted.

    JFET
    Abbreviation for "Junction field effect transistor".

    joule
    The unit of work and energy.

    junction
    Contact or connection between two or more wires or cables. The area where the p-type material and n-type material meet in a semiconductor.

    junction diode
    diode. A semiconductor diode in which the rectifying characteristics occur at a junction between the n-type and p-type semiconductor materials.
    =================================== =============== ===============
    K

    kilo
    Metric prefix for 1000. (103)

    kilovolt-ampere
    1000 volts at 1 ampere.

    kilowatt-hour
    1000 watts for 1 hour.

    kilowatt-hour meter
    A meter used by electric utility companies to measure the amount of electric power used by a customer.

    kinetic energy
    Energy associated with motion.

    Kirchhoff"s current law
    The sum of the currents flowing into a point in a circuit is equal to the sum of the currents flowing out of that same point.

    Kirchhoff"s voltage law
    The algebraic sum of the voltage drops in a closed path circuit is equal to the algebraic sum of the source voltages applied.

    knee voltage
    The voltage at which a curve joins two relatively straight portions of a characteristic curve. For a PN junction diode, the point in the forward operating region of the characteristic curve where conduction starts to increase rapidly. For a zener diode, the term is often used in reference to the zener voltage rating.
    =================================== =============== ========================
    L

    lag
    Difference in time between two waveforms of the same frequency expressed in degrees. Example: One waveform lags another waveform by a certain number of degrees.

    laminated core
    Core made up of sheets of magnetic material insulated from one another by an oxide or varnish.

    lamp
    Device that produces light.

    laser
    Device that produces a very narrow intense beam of light. The name is an axcronym for "light amplification by stimulated emission of radiation.
    lead
    The angle by which one alternating signal leads another in time. Opposite of lag. Also a wire that connects two points in a circuit.

    lead-acid cell
    Cell made up of lead plates immersed in a sulphuric acid electrolyte. An automobile battery usually consists of six lead-acid cells.

    leakage
    Small undesirable flow of current through an insulator or dielectric.

    LED
    Abbreviation for "light emitting diode."

    left-hand-rule
    If fingers of the left hand are placed around a wire so that the thumb points in the direction of electron flow, the fingers will be pointing in the direction of the magnetic field being produced by the conductor.

    Lenz’s law
    The current induced in a circuit due to a change in the magnetic field is so directed as to oppose the flux, or to exert a mechanical force to oppose the motion.

    level detector
    An op-amp circuit that compares two inputs and provides a DC output indicating the polarity relationship between the inputs. A comparitor.

    light
    Electromagnetic radiation in a band of frequencies that can be received by the human eye.

    lifetime
    The time from the creation of an electron hole pair until recombination occurs.

    light-emitting diode
    A semiconductor diode that converts electric energy into electromagnetic radiation at a visible and near infrared frequencies when its pn junction is forward biased.

    limiter
    Circuit or device that prevents some portion of its input from reaching the output. A clipper.

    linear
    Relationship between input and output in which the output varies in direct proportion to the input.

    linear scale
    A scale in which the divisions are uniformly spaced.

    line regulation
    The ability of a voltage regulator to maintain a constant voltage when the regulator input voltage varies.

    live
    Term used to describe a circuit or piece of equipment that is on and has current flow within it.

    load
    A source drives a load. Whatever component or piece of equipment is connected to a source and draws current from a source is a load on that source.

    load current
    Current drawn from a source by a load.

    load impedance
    Vector sum of reactance and resistance in a load.

    loading effect
    Large load impedance will draw a small load current and so loading of the source is small. (light load). A small load impedance will draw a large load current from the source. (heavy load).

    load regulation
    The ability of a voltage regulator to maintain a constant output voltage under varying load currents.

    load resistance
    Resistance of a load.

    logic
    Science of dealing with the principle and applications of gates, relays and switches.

    loss
    Term used to describe a decrease in power.

    low pass filter
    A tuned circuit designed to pass all frequencies below a designated cut-off frequency.
    =================================== =============== ======================
    [/align]
    التعديل الأخير تم بواسطة نغم86 ; 09-01-2006 الساعة 03:41 PM
    ربي خلقتني واحسنت تكويني ......وزدتني شرفا بأن جعلتني فلسطيني


  6. #6
    مشرفة سابقة
    Array الصورة الرمزية نغم86
    تاريخ التسجيل
    Jul 2006
    الدولة
    فلسطين الحبيبة
    العمر
    37
    المشاركات
    288
    شكراً
    0
    شكر 0 مرات في 0 مشاركات
    معدل تقييم المستوى
    223

    [align=left]M

    magnet
    Body that can be used to attract or repel magnetic materials.

    magnetic circuit breaker
    Circuit breaker that is tripped or activated by use of an electromagnet.

    magnetic coil
    Spiral of a conductor which is called an electromagnet.

    magnetic core
    Material that exists in the center of the magnetic coil to either physically support the windings (non-magnetic material) or to concentrate the magnetic flux (magnetic material).

    magnetic field
    Magnetic lines of force traveling from the north pole to the south pole of a magnet.

    magnetic flux
    The magnetic lines of force produced by a magnet.

    magnetic leakage
    The passage of magnetic flux outside the path along which it can do useful work.

    magnetic poles
    Points of a magnet from which magnetic lines of force leave (north pole) and arrive (south pole).

    magnetism
    Property of some materials to attract or repel others.

    magnetizing force
    Also called magnetic field strength. It is the magnetomotive force per unit length at any given point in a magnetic circuit.

    magnetomotive force
    Force that produces a magnetic field.

    majority carriers
    The conduction band electrons in an n-type material and the valence band holes in a p-type material. Produced by pentavalent impurities in n-type material and trivalent impurities in p-type material.

    matched impedance
    Condition that occurs when the output impedance of a source is equal to the input impedance of a load.

    matching
    Connection of two components or circuits so that maximum power is transferred between the two.

    maximum power transfer
    A theorem that states that maximum power will be transferred from source to load when input impedance of the load equals the output impedance of the source.

    Maxwell
    Unit of magnetic flux. One maxwell equals one magnetic line of force.

    mercury cell
    Primary cell using a mercuric oxide cathode, a zinc anode and a potassium hydroxide electrolyte.

    ****l film resistor
    A resistor in which a film of ****l oxide or alloy is deposited on an insulating substrate.

    ****l oxide field effect transistor
    (MOSFET) A field effect transistor in which the insulating layer betwen the gate electrode and the channel is a ****l oxide layer.

    ****l oxide resistor
    A ****l film resistor in which an oxide of ****l (such as tin) is deposited as a film onto the substrate.

    meter
    Any electrical or electronic measuring device. In the metric system, it is the unit of length equal to 39.37 inches.

    meter FSD current
    Value of meter current needed to cause the needle to deflect to its maximum position (full scale deflection).

    meter resistance
    DC resistance of the meter’s armature coil.

    mica capacitor
    Capacitor using mica as the dielectric.

    microphone
    Electroacoustic transducer that converts sound energy into electric energy.

    microwave
    Band of very short wavelength radio waves within the UHF, SHF and EHF bands.

    midband gain
    Gain of an amplifier operating within its bandwidth.

    mid-point bias
    An amplifier biased at the center of its DC load line.

    mil
    One thousandth of an inch (0.001 in.)

    minority carriers
    The conduction band holes in n-type material and valence band electrons in p-type material. Most minority carriers are produced by temperature rather than by doping with impurities.

    mismatch
    Term used to describe a difference between the output impedance of a source and the input impedance of a load. A mismatch prevents the maximum transfer of power from source to load.

    monostable multivibrator
    A multivibrator with one stable output state. When triggered, the circuit output will switch to the unstable state for a predetermined period of time and then return to the stable state. A timer.

    molecule
    Smallest particle of a compound that still retains its characteristics.

    moving coil pick-up
    Dynamic phonograph pick-up in which the stylus causes a coil to move within a fixed magnetic field.

    multimeter
    Electronic test equipment that can perform multiple tasks. Typically one capable of measuring voltage, current and resistance. More sophisticated modern digital multimeters also measure capacitance, inductance, current gain of transistors and/or anything else that can be measured electronically.

    multiplier resistor
    Resistor connected in series with a moving coil meter movement to extend the voltage ranges.

    multisegmant display
    Device made of several light emitting diodes arranged in a numeric or alphanumeric pattern. By lighting selected segments numeric or alphabet characters can be displayed.

    multivibrator
    A class of circuits designed to produce square waves or pulses. Astable multivibrators produce continuous pulses without an external stimulus or trigger. Monostable multivibrators produce a single pulse for some predetermined period of time only when triggered. Bistable multivibrators produce a DC output which is stable in either one of two states. Either high or low. An external stimulus or trigger is required for the bistable circuit to change states, either high to low or low to high.

    mutual inductance
    Ability of one inductor’s lines of force to link with another inductor.
    =================================== =============== =======================
    N

    n-type semiconductor
    A semiconductor compound formed by doping an intrinsic semiconductor with a pentavalent element. An n-type material contains an excess of conduction band electrons.

    negative
    Terminal that has an excess of electrons.

    negative ground
    A system where the negative terminal of the source is connected to the system’s ****l chassis.

    negative ion
    An atom having a greater number of electrons in orbit than there are protons in the nucleus.

    negative resistance
    A resistance such that when the current through it increases the voltage drop across the resistance decreases.

    negative temperature coefficient
    A term used to describe a component whose resistance or capacitance decreases when temperature increases.

    neon bulb
    Glass envelope filled with neon gas which when ionized by an applied voltage will glow red.

    network
    Combination of interconnected components, circuits or systems.

    neutral
    A terminal, point or object with balanced charges. Neither positive or negative.

    neutral atom
    An atom in which the number of negative charges (electrons in orbit) is equal to the number of positive charges (protons in the nucleus).

    neutral wire
    The conductor of a polyphase circuit or a single-phase three wire circuit that is intended to have a ground potential. The potential difference between the neutral and each of the other conductors are approximately equal in magnitude and equally spaced in phase.

    neutron
    Subatomic particle in the nucleus of an atom and having no electrical charge.

    nickel-cadmium cell
    A secondary cell that uses a nickel oxide positive electrode and a cadmium negative electrode.

    node
    Junction or branch point in a circuit.

    noise
    Unwanted electromagnetic radiation within an electrical or mechanical system.

    An operational amplifier circuit having no phase inversion between the input and output.

    non-inverting input
    The terminal on an operational amplifier that is identified by a plus sign.

    non-linear scale
    A scale in which the divisions are not equally spaced.

    normal closed
    Designation which states that the contacts of a switch or relay are closed or connected when at rest. When activated, the contacts open or separated.

    normally open
    Designation which states that the contacts of a switch or relay are normally open or not connected. When activated the contacts close or become connected.

    north pole
    Pole of a magnet out of which magnetic lines of force are assumed to originate.

    Norton’s theorem
    Any network of voltage sources and resistors can be replace by a single current source in parallel with a single resistor.

    notch filter
    A filter which blocks a narrow band of frequencies and passes all frequencies above and below the band.

    npn transistor
    A bipolar junction transistor in which a p-type base element is sandwiched between an n-type emitter and an n-type collector.

    nucleus
    Core of an atom. The nucleus contains both positive (protons) and neutral (neutrons) subatomic particles.

    =================================== =============== =======================
    [/align]
    التعديل الأخير تم بواسطة نغم86 ; 09-01-2006 الساعة 03:47 PM
    ربي خلقتني واحسنت تكويني ......وزدتني شرفا بأن جعلتني فلسطيني


  7. #7
    مشرفة سابقة
    Array الصورة الرمزية نغم86
    تاريخ التسجيل
    Jul 2006
    الدولة
    فلسطين الحبيبة
    العمر
    37
    المشاركات
    288
    شكراً
    0
    شكر 0 مرات في 0 مشاركات
    معدل تقييم المستوى
    223

    [align=left]O

    octave
    Interval between two sounds whose fundamental frequencies differ by a ratio of 2 to 1. 440 Hz. is one octave above 220 Hz.

    offset null
    An op amp control pin used to eliminate the effects of internal component voltages on the output of the device.

    ohm
    Unit of resistance symbolized by the Greek capital letter omega (W).

    ohmmeter
    Device used to measure electrical resistance.

    Ohm’s law
    Relationship between voltage, current and resistance. Ohm’s law states that current in a resistance varies in direct proportion to voltage applied and inversely proportional to resistance.

    Ohms per volt
    Refers to a value of ohms per volt of full scale defection for a moving coil meter movement. The number of ohms per volt is the reciprocal of the amount of current required to produce full scale deflection of the needle. A meter requiring 50 microamps for full scale deflection has an internal resistance of 20 kW per volt. The higher the ohms per volt rating, the more sensitive the meter.

    one-shot
    Monostable multivibrator.

    op-amp
    Abbreviation for operational amplifier.

    operational amplifier
    A high gain DC amplifier that has a high input impedance and a low output impedance. Op-amps are the most basic type of linear integrated circuits.

    oscillate
    To produce a continuous output waveform without an input signal present.

    oscillator
    An electronic circuit that produces a continuous output waveform with only DC applied.

    oscilloscope
    An instrument used to display a signal graphically. Shows signal amplitude, period and waveshape in addition to any DC voltage present. A multiple trace oscilloscope can show two or more waveforms at the same time for phase comparison and timing measurements.

    out of phase
    When the maximum and minimum points of two or more waveshapes do not occur at the same time.

    output
    Terminal at which a component, circuit or piece of equipment delivers current, voltage or power.

    output impedance
    Impedance measured across the output terminals of a device without a load connected.

    output power
    Amount of power a component, circuit or system can deliver to a load.

    overload
    Condition that occurs when the load is greater than the system was designed to handle. (Load resistance too small, load current too high.) Overload results in waveform distortion and/or overheating.

    overload protection
    Protective device such as a fuse or circuit breaker that automatically disconnects a load when current exceeds a predetermined value.
    =================================== =============== =======================
    P
    paper capacitor
    Fixed capacitor using oiled or waxed paper as a dielectric.

    parallel
    Circuit having two or more paths for current flow. Also called shunt.

    parallel resonant circuit
    Circuit having an inductor and a capacitor in parallel with one another. Circuit offers a high impedance at resonant frequency. Sometimes called a "tank circuit."

    pass band
    The range of frequencies that will be passed and amplified by a tuned amplifier. Also the range of frequencies passed by a band pass filter.

    passive component
    Component that does not amplify a signal. Resistors and capacitors are examples.

    passive filter
    A filter that contains only passive or non amplifying components.

    passive system
    System that emits no energy. It only receives. It does not transmit or reveal its position.

    peak
    Maximum or highest amplitude level.

    peak inverse voltage
    (PIV) The maximum rated value of a AC voltage acting in the direction opposite to that in which a device is designed to pass current.

    peak to peak
    Difference between the maximum positive and maximum negative values of an AC waveform.

    pentavalent element
    Element whose atoms have five valence electrons. Used in doping intrinsic silicon or germanium to produce n-type semiconductor material. Most commonly used pentavalent materials are arsenic and phosphorus.

    percent of regulation
    The change in output voltage that occurs between no-load and full-load in a DC voltage source. Dividing this change by the full-load value and multiplying the result by 100 gives percent regulation.

    percent of ripple
    The ratio of the effective rms value of ripple voltage to the average value of the total voltage. Expressed as a percentage.

    period
    Time to complete one full cycle of a periodic or repeating waveform.

    permanence
    Magnetic equivalent of magnetic inductance and consequently equal to the reciprocal of reluctance, just as conductance is equal to the reciprocal of resistance.

    permanent magnet
    Magnet normally made of hardened steel that retains its magnetism indefinitely.

    permeability
    Measure of how m how much better a material is as a path for magnetic lines of force with respect to air which has a permeability of one. Symbolized by the Greek lower case letter mu (m).

    phase
    Angular relationship between two waves.

    phase angle
    Phase difference between two or more waves, normally expressed in degrees.

    phase shift
    Change in phase of a wave form between two points, expressed as degrees of lead or lag.

    phase splitter
    Circuit that takes a single input signal and produces two output signals that are 180° apart in phase.

    phonograph
    Piece of equipment used to reproduce sound stored on a disk called a phonograph record.

    phosphor
    Luminescent material applied to the inner face of a cathode ray tube that when bombarded with electrons will emit light of various colors.

    photoconductive cell
    Material whose resistance decreases or conductance increases when exposed to light.

    photoconduction
    A process by which the conductance of a material is change by incident electromagnetic radiation in the visible light spectrum.

    photodetector
    Component used to detect or sense light.

    photodiode
    A semiconductor diode that changes its electrical characteristics in response to illumination.

    photometer
    Meter used to measure light intensity.

    photon
    Discrete portion of electromagnetic energy. A small packet of light.

    photovoltaic cell
    Component commonly called a solar cell used to convert light energy into electrical energy.

    pi
    Value representing the ratio between the circumference and diameter of a circle and equal to approximately 3.142.

    piezoelectric crystal
    Crystal material that will generate a voltage when mechanical pressure is applied and conversely will undergo mechanical stress when subjected to a voltage.

    piezoelectric effect
    The production of a voltage between opposite sides of a piezoelectric crystal as a result of pressure or twisting. Also the reverse effect which the application of a voltage to opposite sides causes a deformation to occur at the frequency of the applied voltage. (Converts mechanical energy into electrical energy and electrical energy into mechanical energy.)

    pinch-off region
    A region on the characteristic curve of a FET in which the gate bias causes the depletion region to extend completely across the channel.

    plastic film capacitor
    Capacitor in which alternate layers of aluminum foil are separated by thin films of plastic dialectric.

    plate
    Conductive electrode in either a capacitor or battery. In vacuum tube technology, it is the name given to the anode.

    plug
    Movable connector that is normally connected into a socket or jack.

    pnp transistor
    A bipolar junction transistor with an n-type base and p-type emitter and collector.

    pole
    In an active filter, a single RC circuit. A one pole filter has one capacitor and one resistor. A two pole filter has two RC circuits and so on.

    polar coordinates
    Either of two numbers that locate a point in a plane by its distance from a fixed point and the angle this line makes with a fixed line.

    polarity
    Term used to describe positive and negative charges.

    polarized
    A component which must be connected in correct polarity to function and/or d/or prevent destruction. Example: Electrolytic capacitor.

    positive
    Polarity of point that attracts electrons as opposed to negative which supplies electrons.


    positive ground
    A system whereby the positive terminal of the source is connected to the system’s conducting chassis.

    positive ion
    Atom that has lost one or more valence electrons resulting in a net positive charge.

    potential difference
    Voltage difference between two points which will cause current to flow in a closed circuit.

    potential energy
    Energy that has potential to do work because of its position relative to others.

    potentiometer
    A variable resistor with three terhree terminals. Mechanical turning of a shaft can be used to produce variable resistance and potential. Example: A volume control is usually a potentiometer.


    =================================== =============== ================
    [/align]
    التعديل الأخير تم بواسطة نغم86 ; 09-01-2006 الساعة 03:52 PM
    ربي خلقتني واحسنت تكويني ......وزدتني شرفا بأن جعلتني فلسطيني


صفحة 1 من 5 123 ... الأخيرةالأخيرة

معلومات الموضوع

الأعضاء الذين يشاهدون هذا الموضوع

الذين يشاهدون الموضوع الآن: 2 (0 من الأعضاء و 2 زائر)

المواضيع المتشابهه

  1. البحث عن قاموس
    بواسطة omer binhadjah في المنتدى منتدى الفيزياء النووية والجسيمات الأولية
    مشاركات: 0
    آخر مشاركة: 11-07-2011, 11:53 PM
  2. قاموس قوانين الفيزياء
    بواسطة فريدة في المنتدى منتدى الميكانيكا الكلاسيكية
    مشاركات: 5
    آخر مشاركة: 12-31-2010, 09:13 PM
  3. قاموس للمصطلحات الالكترونية.
    بواسطة نغم86 في المنتدى منتدى الفيزياء الكهربية والمغناطيسية
    مشاركات: 25
    آخر مشاركة: 12-20-2009, 01:31 PM

مواقع النشر (المفضلة)

مواقع النشر (المفضلة)

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •